Lancia Motor Club Forum
Buy, Sell and Search => Spares required => Topic started by: theoldsmithy on 23 August, 2023, 10:13:57 PM
-
Hi all
Seems my NSR hub is worn internally such that a replacement bearing is not a tight fit and I can still feel (& more importantly the MoT man can feel) slight play.
Does anyone know where I might find such an item? Not sure who breaks them these days, most places I knew seem to have gone.
Thanks for any help
-
I'd say Tanc Barrett will have some, not the sort of things that flies off the shelf.
-
Thanks, they are looking into it but not sure if they have any. If they do, not sure if they'd sell one.
-
Have a look on the Zagato lancia website.They have them listed as reconditioned items but want an email enquiry.Otherwise you may need to find a machine shop who can sleeve the housing. Best of luck. David
-
Thanks, yes I’ve emailed Zagato but there’s been zero response so far.
If I’m honest, the answer phone message they have is so bad quality & the website so dated I’m not entirely sure they’re still going.
-
Any luck in resolving your problem?
-
Despite phoning Tanc & them saying they'd check, I've heard nothing since. I also emailed them & sent a message on their website, but zero response.
An employee of Deltaworks emailed to say they couldn't find one.
Finally had a slightly odd email from Zagato saying 'check integrale.org.uk' - which as you pointed out earlier, says to email them for price & availability. If you put one in the basket, it says out of stock anyway.
Pretty useless all round then.
Seems maybe I take a punt on the German 16v one on eBay (they have an ABS sensor housing in the casting which I don't think matters) & hope it's ok - £275 down the drain if it isn't.
Could be I get this one sleeved, or bodge it with Belzona. Not too sure the best way to go.
-
At £275 I would go with sleeving as you know what you are starting with, also replacement may not be any better?
Peter
-
Indeed, probably best I think.
-
There are some very good loctite bearing fit products.