Lancia Motor Club Forum

Buy, Sell and Search => Spares required => Topic started by: hugh on 09 August, 2025, 04:00:51 PM

Title: Fulvia Series 2 - rear corners needed!
Post by: hugh on 09 August, 2025, 04:00:51 PM

I'm looking for Fulvia two 'rear corners' - particularly the corners themselves where the rear side panels meet the transverse back panel.
Car is OK from the backs of the wheel arches going forward. Bottoms of the side panels are available commercially, but it's the section between these lower panels and the upper swage line that has been ruined by an 'expert' welder, and I need to find the shape again!

Thanks, Hugh