Flaminia PF Coupe resto

[lancianut666]

Hi all
Had a little play with the new servo and it's position and it looks like I can use the existing mount modified and possibly the front support or one similar. I have just positioned the servo where I think it will have enough clearance for the bonnet and away from the heat of the manifold. I will have to check what pipes go where and I think extension pipes to the new ones already in might be an option.
Clarkey

[lancianut666]

Hi all
The results for the LED panel lights were very encouraging and one type was better than the others as it had an opaque cover that diffused the light better see picture. The in car pictures show the tacho clock with an LED in the backlight position and it is very similar to the original glow worm ones, the speedo clock picture shows an LED in the right hand side backlight position and the difference is clear as the text on the gauge is visible. One disappointment was even with the original bulb replaced by an LED the oil pressure warning lamp is very dim and needs further investigation.
Clarkey

[lancianut666]

Hi all
Managed a bit more time with the servo bracketry. I have reused the original front support but have moved it up and fixed to one of the clamping bolts (replaced with a longer bolt) All being well tomorrow I will do the same on the engine side after I have fabricated a support. The main problem is the new servo has an outlet to the rear brakes at the rear so it has to be a reasonable distance away from the bulkhead.
Clarkey