Author Topic: Spares ID Help - Christmas Quiz  (Read 5854 times)

0 Members and 1 Guest are viewing this topic.

I.M.B.A

  • Lapsed
  • Member
  • **
  • Posts: 11
Spares ID Help - Christmas Quiz
« on: 30 November, 2014, 09:46:37 PM »
I have a selection of parts for later Lancias, but I would love a hand identifying which models the parts are for. All are for sale if there is any interest from the board.

Many thanks

Will






« Last Edit: 30 November, 2014, 09:56:40 PM by I.M.B.A »

SanRemo78

  • Rebel Poster
  • **
  • Posts: 885
Re: Spares ID Help - Christmas Quiz
« Reply #1 on: 30 November, 2014, 11:02:41 PM »
Top picture, I think the door handle is Beta Coupe/HPE, dash vent looks Beta saloon and the U shaped rubbers look like they fit Beta radiator lower support brackets? The tank sender also looks like Beta to me.
Middle picture, left, the white cable looks like a Beta i.e. or VX distributor cable. There's a Beta A post courtesy light switch and the rubber bobbins look like the screw in bonnet stops for a..... Beta.
Bottom picture has a Beta hazard switch and, on the right a Beta brake light switch.

Hope that helps a little and someone else can confirm or correct!

Guy

fay66

  • Permanent resident
  • ***
  • Posts: 6265
Re: Spares ID Help - Christmas Quiz
« Reply #2 on: 01 December, 2014, 01:02:58 AM »
I can't see anything there that belongs to Dedra or Thema.

Brian
8227 8)
Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser

peteracs

  • Administrator
  • Rebel Poster
  • *****
  • Posts: 980
Re: Spares ID Help - Christmas Quiz
« Reply #3 on: 01 December, 2014, 08:33:04 AM »
Hi

Guy is right on the Beta parts, except the rubber bump stops look too small for the Beta I think.

The only other Beta items I think are some of the individual instruments, but would need to have a closer inspection. A least one of the tank gauges are from Betas.

Peter
Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600

SanRemo78

  • Rebel Poster
  • **
  • Posts: 885
Re: Spares ID Help - Christmas Quiz
« Reply #4 on: 01 December, 2014, 01:57:28 PM »
Hi

Guy is right on the Beta parts, except the rubber bump stops look too small for the Beta I think.

The only other Beta items I think are some of the individual instruments, but would need to have a closer inspection. A least one of the tank gauges are from Betas.

Peter

Thanks Peter - my mind can't be that bad considering the number of years since my last Beta went 21 years ago! (since then 4 with the Grande Punto, 13 with Alfa 145, 4 with a C**o)

Guy

I.M.B.A

  • Lapsed
  • Member
  • **
  • Posts: 11
Re: Spares ID Help - Christmas Quiz
« Reply #5 on: 01 December, 2014, 08:03:22 PM »
Thanks all.

Do you (or do you know anyone within the club) who could make use of the parts? I would be happy to pass them on gratis, if the buyer would make a small donation to the RNLI, and cover the cost of postage. I think I have a power steering rack for a Beta looking at a similar item listed on ebay which could go with the lot.

frankxhv773t

  • Permanent resident
  • ***
  • Posts: 2430
Re: Spares ID Help - Christmas Quiz
« Reply #6 on: 03 December, 2014, 09:33:50 PM »
The instruments look the right period for a Beta saloon if much of the rest is Beta. The round black thing above and to the left of the bonnrt syop rubbers looks possibly like a window winder blanking plate where the emergency winding handle goes in.

I.M.B.A

  • Lapsed
  • Member
  • **
  • Posts: 11
Re: Spares ID Help - Christmas Quiz
« Reply #7 on: 05 December, 2014, 06:25:16 PM »
Rev counter and a fuel sender have found a new home, many thanks to Mark for his donation to the RNLI.