Author Topic: Aprilia boot seal  (Read 2126 times)

0 Members and 1 Guest are viewing this topic.

Dave Gee

  • Megaposter
  • *
  • Posts: 253
Aprilia boot seal
« on: 13 September, 2023, 09:49:46 AM »
Does anyone know of a seal obtainable in the UK for an Aprilia boot or could you give me dimensions of the seal in their Aprilia please?
I am still looking for a S2 wheel.

Dave Gee

Kevinlincs

  • Permanent resident
  • ***
  • Posts: 1698
Re: Aprilia boot seal
« Reply #1 on: 13 September, 2023, 09:10:58 PM »
I've used Woolies a few times Dave, very helpful and they do stock a fair amount of stuff but nothing model specific.
If you have an idea on dimensions and shape they may have something suitable.

https://www.woolies-trim.co.uk/
Flavia 815 coupe
Delta integrale

simonandjuliet

  • Permanent resident
  • ***
  • Posts: 2828
Re: Aprilia boot seal
« Reply #2 on: 14 September, 2023, 05:41:00 AM »
I bought the expensive, "correct" one from Italy a while back but the bootlid wouldn't close, the seal was too tall. I have since used an off the peg seal (Woolies etc) and check under the spare wheel every time it goes out in the rain !

Not sure the seals were good when new - hence so many rotten floors ??
Lambda 7th, Aprilia Cabrio,S1&S2Aprilia,Ardea c'cino, Appia c'cino, Appia f'cino, B20s4 ,R4 Sinpar, R4 Rodeo, 65 Moke, 3xR60 Tractor, Toselli 78, Moto Guzzi Ercole,LR Defender, Ypsilon Ibrida HF, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan

Jay

  • Megaposter
  • *
  • Posts: 452
Re: Aprilia boot seal
« Reply #3 on: 14 September, 2023, 09:07:57 AM »
Here's the original info https://www.registroaprilia.it/guarnizioni-per-il-baule-aprilia/ if that helps, the site a bit more interesting info.  
« Last Edit: 14 September, 2023, 01:29:19 PM by Jay »
Julian Wood, Kingston, London